The Burris Veracity riflescope is known for its precision and reliability, but like any piece of equipment, it can occasionally malfunction. One frustrating issue some users encounter is the elevation knob failing to reset to its zero position. This can significantly impact your shooting accuracy and overall hunting or target shooting experience. This guide will walk you through the potential causes and solutions for a non-resetting Burris Veracity elevation knob.
Understanding the Problem: Why Won't My Elevation Knob Reset?
Before diving into solutions, let's understand why this problem might occur. The elevation knob's inability to reset typically stems from one of the following:
-
Mechanical Issues: This is the most common cause. It could be due to:
- Dirt, Debris, or Lubricant Buildup: Accumulated debris can hinder the smooth operation of the internal mechanisms. Excessive lubricant can also gum up the works.
- Damaged or Worn Parts: Repeated use, especially in harsh conditions, can wear down internal components, leading to malfunctions. This could include a broken spring, a damaged gear, or a binding issue within the adjustment mechanism.
- Manufacturing Defect: While rare, a manufacturing defect could be the culprit, though this is less likely if the scope has been used for a while.
-
User Error: Although less frequent, user error can sometimes contribute to the problem:
- Over-Tightening: Forcibly turning the knob beyond its intended range can damage internal components.
- Improper Handling: Dropping or otherwise mishandling the scope can also cause internal damage.
Troubleshooting Steps: Diagnosing the Problem
Before attempting any repairs, carefully examine your scope. Here's a step-by-step troubleshooting guide:
-
Visual Inspection: Closely inspect the elevation knob and its surrounding area for any visible signs of damage, dirt, or debris. Use a magnifying glass if necessary for a thorough examination.
-
Cleaning: If you find any dirt or debris, carefully clean the knob and its surrounding area using a soft brush and compressed air. Avoid using harsh chemicals or solvents.
-
Gentle Manipulation: Gently try to rotate the elevation knob back and forth to see if there's any binding or resistance. Listen for unusual clicks or grinding sounds.
Solutions: Fixing the Non-Resetting Knob
If cleaning and gentle manipulation don't resolve the issue, the problem likely lies within the internal mechanisms of the scope. At this point, you have several options:
-
Contact Burris Customer Service: Burris has an excellent reputation for customer service. Contacting them is often the best first step. They can provide advice, determine if the problem falls under warranty, and guide you through potential solutions. They may even offer repair or replacement services.
-
Professional Repair: If the scope is out of warranty or if the problem is complex, consider sending it to a professional gunsmith specializing in riflescope repair. A qualified technician has the expertise and tools to diagnose and repair internal mechanical issues.
Prevention: Maintaining Your Burris Veracity
Preventing future issues is crucial. Here are some tips for maintaining your Burris Veracity and avoiding elevation knob problems:
-
Regular Cleaning: Regularly clean your scope, removing any dirt, debris, or excess lubricant.
-
Proper Handling: Handle your scope with care. Avoid dropping or subjecting it to excessive shock.
-
Storage: Store your scope in a safe, dry place when not in use.
-
Lubrication (Use with Caution): If you feel the need to lubricate the elevation knob mechanism (only if absolutely necessary and with the right lubricant recommended by Burris), apply a very small amount of high-quality, firearm-safe lubricant. Too much lubricant can cause more problems.
By following these troubleshooting steps and preventative measures, you can help ensure your Burris Veracity riflescope continues to perform accurately and reliably for years to come. Remember, contacting Burris directly is often the best first step when dealing with any malfunction.
